Ubiquiti UACC-Adapter-PoE-24-12W-5, PoE Adapter, 24V DC, 12W, 5-pack

Ubiquiti UACC-Adapter-PoE-24-12W-5, 24V DC PoE Adapter 2.5 GbE 5pack
set of 5 reliable PoE adapters/injectors with 12 W output power and 2.5 GbE connectivity support for powering network devices
The compact passive PoE adapter from Ubiquiti is used to power network devices over an Ethernet cable without the need for a separate power cable to the device. Suitable for installing smaller PoE devices, such as access points or cameras supporting passive PoE 24V.
The UACC-Adapter-PoE-24-12W PoE adapter from Ubiquiti provides up to 12 W at an output voltage of 24 V DC. Thanks to its universal input voltage of 100–240 V AC, the adapter can be used in different countries without further modifications. It supports 2.5 GbE connection and is equipped with RJ-45 ports for both data input and PoE output.
The adapter is equipped with comprehensive surge protection in both differential and common mode, with a maximum discharge of 1500 A at an 8/20 µs pulse. ESD/EMP protection of 6 kV/10 kV protects connected devices against electrostatic discharge. Overload protection activates at a current of 0.6–1 A.
The adapter is intended for powering Ubiquiti network devices, including the Wave-Fiber-ONU, UF-LOCO, UISP-FIBER-XG, UF-Nano, UF-WIFI, UACC-AE and UF-WiFi6 models. Thanks to 2-wire power delivery on pins 4, 5 (+) and pins 3, 6, 7, 8 (-), it ensures a stable power supply.

Key features

• output power 12 W at 24 V DC with a current of 0.5 A
• universal input voltage 100–240 V AC with a frequency of 50/60 Hz for worldwide use
• support for 2.5-gigabit connection for fast data transfer
• surge protection with resistance up to 1500 A (8/20 µs) and ESD/EMP protection of 6 kV/10 kV
• remote reset function and a physical button for resetting the device
• high efficiency of 82.96% with minimal standby power consumption of 0.1 W
• compatibility with Ubiquiti products including UF-LOCO, UF-Nano, UF-WiFi6 and others
• CE, FCC, IC, UL, PSE, BSMI, NDAA compliant

Network characteristics
Network interface: RJ-45 2× RJ-45 (1× data, 1× data + PoE)
Gigabit LAN port: yes
Interface speed (Multi-Gigabit): 10/100/1000 Mbps (Gigabit) and now also 2.5 Gbps (2.5 GbE)
AC connector (power): IEC-320 C6
Data input/PoE: shielded RJ45 socket

Connectors:

• 1× RJ-45 (LAN): shielded input port serving purely for data connection. Connects with a standard Ethernet cable to a router, switch or computer
• 1× RJ-45 (PoE): shielded output port that combines data transmission and passive 24V power - a cable runs from it directly to the powered end device (e.g. a UniFi access point)
• 1× IEC-320 C6 (so-called "clover" / "trefoil"): three-pin power connector on the side/end of the chassis, into which the enclosed power cable is plugged for power from a standard 230V socket
  (the third pins serve to ground the surge protection)

LED indicators: 1x status LED - quick power diagnostics
Buttons: reset
Remote reset option: yes

Power supply:

• integrated power cable: C6 connector (three-wire connection via C6 connector)
• 2-pair power: pins 4, 5 (+) and pins 3, 6, 7, 8 (-)

Electrical parameters
Input voltage: 100–240 V AC
Input frequency: 50/60 Hz
Input current: 0.3 A @ 120 V AC, 0.2 A @ 240 V AC
Inrush current: <30 A (peak) @ 120 V AC, <60 A (peak) @ 230 V AC
Output voltage: 24 V DC
Output current: 0.5 A
Supported output voltage range: 22.8–25.2 V
Total output power: 12 W
Efficiency: 82.96%
Switching frequency: 50 kHz
Output ripple: max. 1%
Line regulation: ? 3%
Load regulation: ? 5%
Maximum energy consumption (standby): 0.1 W

Protection and safety

• surge protection (surge, ESD/EMP): ESD/EMP 6 kV / 10 kV
• surge protection – modes: difference and common mode
• maximum discharge current on surge: 1500 A (8/20 µs) – power supply
• peak pulse current of data (peak pulse): 36 A (10/1000 µs)
• over-current protection: 0.6–1 A
• parallel capacitance (data lines): < 5 pF

Physical characteristics
Color: white
Dimensions (w x d x h): 89 x 46 x 33 mm
Weight (g): 100 (1 pc)
Operating ambient temperature (°C): 0 to 40
Operating ambient humidity (%): 5 to 95% non-condensing
Mounting options: wall mounting using a plastic bracket (optional), free placement (laid on a surface) - shelf, desk, directly on the bottom of a small rack, alternative mounting in a data cabinet (rack) - on a rack shelf, mounting using cable ties or hook-and-loop fasteners, using 3D-printed brackets (snapping directly into rack rails)
Installation of the passive PoE adapter (Plug & Play):

• connect the cable from your switch or router to one RJ-45 port labeled LAN
• connect the cable leading to the powered device (e.g. a UniFi access point) to the second port labeled PoE
• plug the enclosed power cable into a socket

NDAA Compliant: yes

Package contents

• 5× Ubiquiti UACC-Adapter-PoE-24-12W PoE adapter (with 2.5 GbE support and 12 W output)
• 5× power cable for connection to the electrical grid (with C6 connector on the adapter side)

Link to manufacturer's page: https://techspecs.ui.com/unifi/other/uacc-adapter-poe-24-12w