Ubiquiti ECS-24S-PoE - Enterprise Campus 24S PoE

Ubiquiti ECS-24S-PoE, UniFi Enterprise Campus 24S(Stacking) PoE switch

This product belongs to the "Unifi Enterprise Partner Program" - all sales are subject to project registration with a completed form.

The top-tier 24-port L3 switch with PoE+++ support is designed for modern infrastructures that require high throughput, reliability and advanced network functions.
It offers a combination of 8× 2.5G and 16× 10G RJ-45 ports with PoE+++ power, complemented by 2× 100G QSFP28 and 4× 25G SFP28 for ultra-fast uplinks. A total PoE output of up to 1050 W in shared mode provides enough power for large deployments of IP cameras, APs or other devices.
Critical elements such as dual hot-swap power modules and four replaceable fans ensure uninterrupted operation and easy maintenance without downtime. The SGCC steel metal chassis increases device durability and meets CE, FCC and IC industry standards. Thanks to its 1U height and the included mounting kit, it is ready for rack installation, while a center bracket or shelf can be used for 2-post racks.
The touch 1.3" display provides a quick overview of the system status and allows basic control directly on the device. Thanks to stacking support, multiple switches can easily be connected into a single logical unit, enabling centralized management and significant simplification of the network infrastructure. The solution is ideal for environments where capacity needs to be expanded without complex configuration. High throughput and fast synchronization between units ensure reliable operation even under heavy load. Stacking thus provides an efficient way to build a robust and easily expandable network.

Key features

• Etherlighting backlit ports - indication of port location, speed/link and native VLAN/network
• 16× 10G RJ-45 PoE+++, 8× 2.5G RJ-45 PoE+++, 4× 25G SFP28
• 2× 100G QSFP28 for stacking
• full Layer 3 functionality - third-layer routing without throughput limitations
• backup power support - redundant power - two hot-swappable power modules (2× 600W)
• four hot-swappable fans (Hot-Swappable)
• 1.3" touch LCM display module for monitoring and control
• total PoE budget up to 1050 W (AC 100–240 V, shared mode)
• support for UniFi Network version 9.0.114 and higher

Port layout:

• 1 GbE RJ-45 - 1x 1 (1G/100M/10M) - management-only OOB port
• 2.5 GbE RJ-45 - 8x (all PoE+++) (2.5G/1G/100M/10M) - 10/100M half duplex not supported
• 10 GbE RJ-45 - 16x (all PoE+++) (10G/5G/2.5G/1G/100M/10M) - 10/100M half duplex not supported
• 25G SFP28 - 4x (25G/10G/1G) - uplink ports for high-speed connectivity
• 100G QSFP28 - 2x (100G) - stacking port only, does not support uplink
• 1x RJ-45 console port

Performance:
Switching capacity: 460 Gb/s
Forwarding rate: 342 Mpps
Packet buffer size: 8 MB
Total non-blocking throughput: 230 Gb/s
Supported VLANs: 1000
MAC address table size: 32,000
Static IPv4 routes: 512
Access Control List (ACL):

• IPv4: 256 rules
• MAC: 256 rules

L3 layer functions:

• DHCP server for locally managed networks
• Inter-VLAN Routing (local networks)
• static routing (local networks)

L2 layer functions:

• LACP port aggregation
• Stacking
• STP & RSTP
• Cross-Stack LAG
• QoS (DSCP)
• AV profiles (Play, Dante, Q-SYS, NDI, SDVoE, Shure, AES67, Crestron)
• advanced IGMP configuration (Querier, Fast Leave, Router Port)
• IGMP Snooping
• 802.1X Control
• MAC-based ACLs and device isolation
• DHCP Snooping & Guarding
• egress rate limit
• flow control
• Storm Control
• Multicast & Broadcast rate limiting
• MAC address blocking
• MAC-based port security
• IP protocol-based ACL and network isolation
• port mirroring and isolation
• Jumbo frames
• LLDP-MED
• Voice VLAN
• loop prevention

Hardware:
Max. PoE output: up to PoE+++ (802.3 bt up to 90 W, Type 4, Class 8)
Total PoE power budget:

• 100–240 V AC shared mode: 1050 W with two 600 W modules
• 100–240 V AC redundant mode: 450 W with two 600 W modules

PoE ports:

• 24x PoE+++

Total PoE power budget: up to 1050 W (with two 600 W power modules, shared mode)
Max. PoE power per port per PSE:

• PoE (Power Protection Reader): 15.4 W - PoE+: 30 W - PoE++: 60 W - PoE+++: 90 W (per 1 port)

Management:

• Ethernet
• OOB management port
• Serial Console
• AR

Software: UniFi Network application version 9.0.114 (for configuring and managing UniFi devices)

Power method: 2x universal input, 100–240 V AC, 50/60 Hz
Input power method: 2x AC input, hot-swappable power modules (supplies)

Maximum power consumption: 150 W (without PoE output load), 2,400 W (including PoE output, full load)
Redundancy and cooling:

• power supplies: 2× hot-swap 600W AC/DC power modules, redundant
• number of fans: 4 (40x40 mm) - hot-swappable fan modules (modules operate with 3+1 redundancy)

LEDs: Ethernet, SFP28, system
Buttons: factory reset
LCM display: 1.3" touch display (module)
Etherlighting technology:

• intelligent backlighting of ports and system states
• Ethernet, SFP28 (for optimal brightness use Etherlighting patch cables) - colour-coded status indication

Dimensions (mm): 442.4 × 496 × 44
Weight (g): 9200 (9300 with rack brackets)
Colour: silver
Chassis material: SGCC steel
Mounting material: SGCC steel
ESD/EMP protection: air: ± 12 kV, contact: ± 12 kV
Heat dissipation: 512 BTU/hr (without PoE output)
Ambient operating temperature (°C): -5 to 40
Ambient operating humidity: 10 to 90% non-condensing
Form factor: rack mount (1U full depth) - for optimal support requires a 4-post rack, a center bracket or a rail shelf for 2-post racks
Supported rack depth: four-post racks (cabinets) 482.6 mm (19"), post depth between 650 and 1,000 mm (25.6–39.4")
Use: indoor

NDAA Compliant: yes

Package contents:

• UniFi Enterprise Campus 24S PoE switch
• 2x power cable
• 2x replaceable power modules (hot-swap) - installed in the device body
• 4x replaceable fans (hot-swap) - installed in the device body
• installation kit for 1U rack mounting (screws, rack mounting brackets, etc.) - also suitable for 2-post racks with a bracket
• user manual

Manufacturer page link: https://techspecs.ui.com/unifi/switching/ecs-24s-poe
Installation guide: installation identical to ECS-24-PoE (dimensions, rack mounting, power and cooling) - the ECS-24S-PoE model supports HW stacking, which requires additional cabling and a different port layout (stacking cables, high-speed DAC cables/optics, differences in structured cabling layout)