TP-Link Switch TL-SG105MPE Easy Smart, 5x GLAN, 4x PoE+, 120W

The TP-Link TL-SG105MPE Gigabit "Plug and Play" switch is suitable for surveillance systems in offices, student dormitories and small businesses. It has a total of 5 10/100/1000 Mbit/s RJ45 ports, four of which are 802.3af/at PoE+. These ports deliver a total power of 120 W (up to 30 W per port). Thanks to these ports, power and data are transmitted over a single cable. The switch provides network monitoring, traffic management according to your priorities, VLAN support and automatic PoE recovery.

Main Advantages
Wide connectivity – 5x 10/100/1000 Mbit/s RJ45 port
High total power – 120 W
Automatic detection of the required PoE power
Automatic PoE recovery for stable operation
Practical IGMP Snooping and QoS features
Easy device management and "Plug and Play"
High-quality metal housing

Automatic PoE Recovery for Stable Operation
The unit automatically detects the required PoE power for connected devices. This protects them from damage and supplies them with enough energy to operate. Has a connected device switched to offline mode or stopped responding? The TP-Link switch detects the fault and restarts it. This ensures stable operation without you having to monitor it manually.

Powerful Network with Practical Features
IGMP Snooping optimizes multicast traffic and the flow of multimedia data transmissions. This ensures better network performance, especially for applications such as IPTV. QoS (Quality of Service) provides smooth and trouble-free data transmission for delay-sensitive applications (voice or video applications). It enables easy and fast communication without significant slowdowns.

Device Compatibility
The switch is compatible with PoE devices. You can therefore connect IP cameras, access points and IP phones to it. The switch also works with wired devices that do not have PoE – computers, printers and IPTV.

Easy Management
Want to monitor the network and track the behavior of your TP-Link switch? The web user interface and the free Easy Smart Configuration Utility software tool extend the device management functions. You can configure it according to your preferences and keep track of its operation.

Robust and High-Quality Switch
The internal part of the switch is protected by a high-quality metal housing, which extends the service life of the device. The fanless design reduces power consumption. At the same time, it operates more quietly than switches with a fan.

Specifications

Brand: TP-Link
Model: TL-SG105MPE
Purpose: switch
System requirements: Microsoft Windows to run the Utility

Hardware
Standards and protocols: IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3x, IEEE 802.1q, IEEE 802.1p, IEEE 802.3at
Interfaces: 5x 10/100/1000Mbps RJ45 port, AUTO Negotiation/AUTO MDI/MDIX
Cooling: fanless
Power supply: external power adapter (Output: 53.5 VDC / 2.43 A)

PoE Ports (RJ45)
Standard: 802.3 af/at compatible
PoE ports: Port 1 – Port 4
PoE Power Budget: 120 W

Network Media
10BASE-T: UTP cable category 3, 4, 5 (maximum 100 m), EIA/TIA-568 100Ohm STP (maximum 100 m)
100BASE-TX: UTP cable category 5, 5e (maximum 100 m), EIA/TIA-568 100Ohm STP (maximum 100 m)
1000BASE-T: UTP cable category 5, 5e, 6 or higher (maximum 100 m), EIA/TIA-568 100Ohm STP (maximum 100 m)

Performance
Switching capacity: 10 Gbps
Packet forwarding rate: 7.44 Mpps
MAC address table: 2 K
Packet buffer: 1 Mb
Jumbo Frame: 16 KB

Software Features
Quality of Service: Port-Based/802.1p/DSCP support, 4 priority queues support, Rate Limit, Storm Control
L2 features: IGMP Snooping V1/V2/V3, Static Link Aggregation, Port Mirroring, Cable Diagnostics, Loop Prevention, PoE Auto Recovery, Extended Mode
VLAN: support for up to 32 VLANs simultaneously (from 4K VLAN IDs), MTU/Port/Tag VLAN
Management: Web GUI, Easy Smart Configuration Utility
Transmission method: Store-And-Forward

Power and Heat Dissipation
Max. power consumption: 4.34 W (220 V/50 Hz without connected PD), 137.01 W (110 V/50 Hz with connected 120 W PD)
Max. heat dissipation: 14.8 BTU/h (without connected PD), 467.17 BTU/h (with connected 120 W PD)

Physical Parameters
Operating temperature: 0 – 40 °C
Storage temperature: -40 – 70 °C
Operating humidity: 10% – 90% RH non-condensing
Storage humidity: 5% – 95% RH non-condensing
Dimensions (W x D x H): 99.8 × 98 × 25 mm

Package Contents
1x TL-SG105MPE device
1x power adapter
1x installation guide
1x rubber feet

Number of ports: < 8
PoE 802.3af: PoE+
Transfer speed: 10/100/1000
SFP: No
Management: Smart switch
Manufacturer: TP-Link