Mio MiVue MP30 Dual 2K WIFI camera for motorcyclists

Mio MiVue MP30 Dual 2K WIFI camera for motorcyclists
Dual 2K 1440P synchronous recording, precisely capturing every detail of the road condition both in front and behind.
• Recording in 2K WQHD resolution 1440p (2560 x 1440) for both front and rear camera
• 60 frames per second with HDR at Full HD resolution
• Built-in GPS, route and its history
• Automatic shutdown after 3 minutes of inactivity, restart when moving
• Automatically/manually triggered event recording
• IP67 water resistance for the entire device
• Integrated WIFI connection for backing up video to phone and OTA updates
• Continuous recording on built-in 3200mAh battery for up to 4.5 hours
• Support for MicroSD memory cards up to 256GB capacity
High-quality video even at high speeds with 60 frames per second
Compared with 30 frames/s, this double data density enables extremely detailed and smooth images even at high speed.
Integrated WIFI
Integrated WIFI synchronises videos with your smartphone. The camera firmware can be easily updated using OTA (Over-the-air) technology, so your device always stays up to date.
Dual cameras support HDR (High Dynamic Range) recording.
Captures multiple images in rapid succession using different exposure values, then combines several frames to create a single image. Handles a wide range of lighting conditions in the scene so that objects in both bright and dark areas are visible.
Click and ride
Thanks to magnetic attachment, recording starts automatically as soon as the device is connected to the mount. When the device is removed from the mount, it switches off automatically. It maximally saves energy, prevents users from forgetting to switch the device on or off, and also simplifies operation.
Automatic shutdown after 3 minutes of inactivity
Thanks to G-sensor detection, if the device remains still for 3 minutes without any movement or operation, it automatically enters standby mode to save energy. When the device detects movement or vibration, it resumes recording from standby mode.
Easy installation and adjustable tilt angle
Stick the mount to the side of the helmet. Attach the device to the mount by sliding it downward until it clicks into place, as indicated by a "click".
There are several adjustment points between the mount and the camera that allow users to adjust the camera's tilt angle to find the optimal recording angle.
3200mAh battery for up to 4 - 4.5 hours of continuous recording
No need for frequent charging; the large 3200mAh battery capacity enables continuous recording for up to 4-4.5 hours.
Charging time from 0 to 100% is less than 5 hours.
Emergency recording
Emergency event recordings are saved to a separate folder so they are not overwritten
Emergency event recording triggered

• Manually by user pressing the button
• Impact detected by G-sensor
• Tilt detection
  Waterproof design IP67
  The device is waterproof to IP67 and can be used in all weather conditions