Marimex Orlando pool 4.57x1.07 m with accessories

The Orlando pool is designed for year-round use. After the swimming season it does not need to be disassembled and stored; it is enough to winterize it properly and, the following year before the swimming season, de-winterize it and start using it again. By leaving it in the garden even outside the swimming season, you save time, money on water, and above all the water itself. When winterized outdoors, more than 80 % of the water remains in the pool, which you can reuse repeatedly in the next season. This is an ecological solution for pool winterization.
Another advantage of the Orlando pool is its stable and sturdy construction, galvanized pool wall, wide water surface and easy setup. Just prepare the place for the pool, unroll the pool underlay, unpack and assemble the pool. You can start filling the pool with water within 120 minutes of unpacking. The pool walls are made of sheet steel with an anti-corrosion treatment, and the pool liner is frost-resistant. We recommend covering the pool with a cover sheet after swimming. The pool liner is replaceable - if the pool is damaged you can buy it as a replacement part.
Pool liner:
The pool liner is made of plasticized PVC. High-quality workmanship ensures long-term trouble-free use of the pool.

• wall thickness: 0.225 mm / bottom thickness: 0.225 mm
• inner liner pattern = blue
• outer liner pattern = blue
  Advantages of Orlando pools
  Durability
  The Orlando pool consists of a liner stretched over sturdy steel panels. As a result it is highly stable and at the same time resistant to mechanical damage.
  Possibility of sinking
  If the expert instructions for preparing the site are followed, the pool can be partially or fully sunk into the ground. This creates the impression of a well-kept garden without disturbing the terrain.
  Year-round solution
  Due to the properties of the construction, the pool remains in the garden all year round. In winter only part of the water is drained, the accessories are disconnected, and the pool is winterized using pool disinfection products.
  Saving money and water
  By winterizing the pool outdoors, water resources are saved and at the same time costs for water supply and sewage are reduced. Properly treated pool water lasts until the next swimming season, and the pool does not need to be completely refilled.
  Connecting the filtration:
  You can connect either cartridge or sand filtration to the pool. Wall fittings are prepared for connecting the filtration, to which the Olympic skimmer is connected, and onto it a hose with a diameter of 32 mm (5/4"). For higher-quality and faster filtration we recommend purchasing sand filtration.
  The package contains:
• Orlando pool (steel wall, liner and strips)
• manual
• small installation material necessary for setting up the pool (strips, couplings, etc.)
• Olympic skimmer
  Other accessories (ladder, underlay, cover sheet) must be purchased separately. The pool is suitable for use with salt water; a salt chlorinator can be connected to it (provided the filtration has sufficient capacity for the given chlorinator). The assembly manual also covers accessories that are not included in the package and must be purchased separately.
  Pool dimension tolerances:
  The stated pool dimensions are approximate only and may be affected by the evenness of the base or the volume of water filled. The permitted manufacturing deviation is 5 %.
  Sinking the Orlando pool:
  The Orlando pool can be partially or fully sunk into the ground. For its comfortable and safe use all construction recommendations and sinking measures must be observed. The pool must stand on undisturbed ground, not on fill. Before sinking, the groundwater level at the construction site must be verified and eliminated. We recommend restricting access to the pool so that it is not a danger to children or animals. It is also important to consider the placement of the filtration and other accessories in the case of sinking.
  Storage of the Orlando pool:
  Orlando pools do not need to be dismantled outside the swimming season; they can remain set up all year round. However, after the end of the swimming season the pool must be winterized - pump out the water so that its level is about 10 cm below the skimmer and close the return jet with a plug. Disconnect the filtration and other accessories and apply chemical products for pool winterization to the pool. If you cannot disconnect the hoses, lower the water level 10 cm below the return jet. Then the water must be pumped out of the hoses so that frost does not damage them through any expansion of ice. We strongly advise against draining the entire pool and removing the pool liner from the pool structure. The pool could collapse and could be damaged. Detailed information on winterizing the pool can be found in the manual.
  Dimensions and type of pool
  Color: gray
  Pool diameter: 4.57 m
  Water surface diameter: 457 cm
  Pool height: 1.07 m
  Water depth: 0.92 m
  Model range: Orlando pools
  Construction: steel wall
  Pool: without filtration
  Pool shape: round
  Pool equipment
  Cover sheet included: no
  Underlay included: no
  Ladder included: no
  Skimmer included: yes, Olympic
  Pool equipment
  Cover sheet included: no
  Underlay included: no
  Ladder included: no
  Skimmer included: yes, Olympic

The Orlando pool is designed for year-round use. After the swimming season it does not need to be disassembled and stored; it is enough to winterize it properly and, the following year before the swimming season, de-winterize it and start using it again. By leaving it in the garden even outside the swimming season, you save time, money on water, and above all the water itself.