Marimex Orlando pool 3.66x1.07 m with accessories - RATTAN motif

The Orlando pool in rattan design is a pool intended for year-round use. After the bathing season it does not need to be dismantled and stored away; it is only necessary to winterize it properly, and the following year before the bathing season to de-winterize it and start using it again. By leaving it in the garden outside the bathing season too, you save time, money on water, and above all the water itself. When winterized outdoors, more than 80 % of the water remains in the pool, which you will reuse repeatedly in the next season. This is an ecological solution for winterizing a pool.
Another advantage of the Orlando pool is its stable and sturdy construction, galvanized pool wall, wide water surface, and easy setup. Simply prepare the place for the pool, unroll the pool groundsheet, unpack the pool and assemble it. Water can be filled within 120 minutes of unpacking the pool. The pool walls are made of steel sheet with anti-corrosion treatment, and the pool liner is frost-resistant. We recommend covering the pool with a cover sheet after swimming. The pool liner is replaceable - if the pool is damaged, you can buy it as a spare part.
Really anyone can enjoy swimming in their own large pool.
Pool liner:
Pool liner made of plasticized PVC. High-quality workmanship ensures long-term trouble-free use of the pool.

• pool liner thickness: 0.25 mm / sheet wall thickness: 0.4 mm
• inner liner pattern = blue
• outer wall pattern = rattan
  Advantages of Orlando pools
  Durability
  The Orlando pool consists of a liner stretched over sturdy steel panels. Thanks to this it is highly stable and at the same time resistant to mechanical damage.
  Possibility of sinking
  If the expert instructions for preparing the ground are followed, the pool can be partially or fully sunk into the ground. This creates the impression of a well-kept garden without disturbing the terrain.
  Year-round solution
  Due to the properties of the construction, the pool remains in the garden all year round. In the winter period the water is only partially drained, accessories are disconnected, and the pool is winterized using pool disinfection products.
  Saving money and water
  Winterizing the pool outdoors conserves water resources and at the same time reduces water supply and sewage charges. Properly treated pool water lasts until the next bathing season and the pool will not need to be completely refilled.
  Connecting filtration:
  You can connect either cartridge or sand filtration to the pool. Wall fittings are prepared for connecting the filtration, to which the Olympic skimmer is connected and a 32 mm (5/4") hose is attached to it. For higher-quality and faster filtration we recommend purchasing sand filtration.
  Contents of the Orlando pool package:
• Orlando pool (grey steel wall, liner and profiles)
• manual
• small installation material needed to set up the pool (profiles, connectors, etc.)
• Olympic skimmer
  Other accessories (ladder, groundsheet, cover sheet) must be purchased separately.
  The pool is suitable for use with salt water; a salt chlorinator can be connected to it (provided the filtration has sufficient capacity for the given chlorinator).
  The assembly manual also covers accessories that are not included in the package and must be purchased separately.
  Pool dimension tolerances:
  The stated pool dimensions are approximate only and may be affected by the evenness of the base or the volume of water filled. The permitted manufacturing deviation is 5 %.
  Sinking the Orlando pool:
  The Orlando pool may be partially or fully sunk into the ground. For comfortable and safe use, all construction recommendations and sinking measures must be observed. The pool must stand on undisturbed ground, not on fill. Before sinking, the groundwater level at the construction site must be checked and eliminated. We recommend restricting access to the pool so that it does not pose a danger to children or animals. When sinking, it is also important to consider the placement of the filtration and other accessories.
  Storage of the Orlando pool:
  Orlando pools do not need to be dismantled outside the bathing season; they can remain set up all year round. However, after the end of the bathing season the pool must be winterized - drain the water so that its level is roughly 10 cm below the skimmer, and close the return nozzle with a plug. Disconnect the filtration and other accessories and apply chemical winterizing products to the pool. If you cannot disconnect the hoses, lower the water level 10 cm below the return nozzle. Then the water must be drained from the hoses so that frost does not damage them through ice expansion.
  We strongly advise against draining the entire pool and removing the pool liner from the pool frame. The pool could collapse and be damaged.
  Specifications
  Pool dimensions and type
  Pool diameter3.66 m
  Pool height1.07 m
  Poolwithout filtration
  Colourrattan
  Water surface diameter360 cm
  Total water volume in the pool9.4 m3
  Constructionsteel wall
  Pool shapecircle
  Pool equipment
  Cover sheet included in packagesno
  Groundsheet included in packagesno
  Ladder included in packagesno
  Skimmer included in packageyes, Olympic
  Package dimensions and weight
  Weight52 kg

The Marimex Orlando rattan pool features a steel frame with PVC liner, a diameter of 366 cm, a depth of 107 cm and a volume of 9.4 m3, so it provides enough space for family swimming. The pool is designed for year-round use, and the liner is frost-resistant and replaceable. The package includes an Olympic skimmer filtration and other accessories must be purchased separately. Installation requires careful preparation of the base, and the pool can be partially or fully sunk.