Marimex Orlando Premium Pool DL 3.66 x 5.48 x 1.22 m - GRAPHIT, pool, membrane

The Orlando Premium pool is designed for year-round use. After the swimming season it does not need to be disassembled and stored; it is enough to winterize it properly and, the following year before the swimming season, de-winterize it and start using it again. When winterized outdoors, more than 80 % of the water remains in the pool, which you can reuse repeatedly in the next season. All pools from the Orlando Premium range can be set up in the garden as classic above-ground pools, or they can be partially or almost completely sunk into the ground. The pool body is made of high-quality German deep-drawn sheet steel, twice as thick as is common for classic above-ground pools. It is additionally surface-treated with hot-dip galvanizing on both sides and a four-layer baked lacquer. The materials used and the special construction make it possible to offer pools with a depth of 1.2 meters, which is usual only for luxury in-ground pools. Pools of the new Orlando Premium range are equipped with a special coping strip with a wave breaker. The inner walls and bottom of the new pools are covered with a reinforced liner, which until now was used exclusively for classic in-ground pools.
Dimensions including struts:
5.6 x 5.5 m
Pool liner:
The inner walls and bottom of the new pools are covered with a reinforced liner, which until now was used exclusively for classic in-ground pools.
inner liner pattern = blue
outer liner pattern = graphite
The pool package contains:

• pool body - sheet steel in gray color
• inner blue pool liner
• connecting material
  Storage of Orlando pools:
  Orlando pools do not need to be dismantled outside the swimming season; they can remain set up all year round. However, after the end of the swimming season the pool must be winterized - pump out the water so that its level is about 10 cm below the skimmer and close the return jet with a plug. Disconnect the filtration and other accessories and apply chemical products for pool winterization to the pool. If you cannot disconnect the hoses, lower the water level 10 cm below the return jet. Then the water must be pumped out of the hoses so that frost does not damage them through any expansion of ice. We strongly advise against draining the entire pool and removing the pool liner from the pool structure. The pool could collapse and could be damaged.
  Dimensions of 1 pc of packaged goods
  Height: 80.00 cm
  Width: 138.00 cm
  Length: 120.00 cm
  Weight: 79.00 kg

An oval pool, one of the most popular in the entire Orlando Premium pool range. Thanks to their shape, oval pools provide a sufficient length of water surface while leaving enough room at the sides of the pool, for example for a pleasant seating area furnished with garden furniture and a parasol.